How To Take Apart A Sleep Number Bed? 13 Easy Steps

This article will provide some ideas on how to take apart a sleep number bed. Now we need to know a little bit about a sleeping bed. Sleep number beds are beds that have sleep number technology built into them.

The bed is electronically monitored every time a person is in it, and the electronics will change the firmness of the mattress accordingly.

The sleep number bed system may be overwhelming to people at first, but with a little bit of research and patience, people should be able to take apart their own bed in no time! It really is not as difficult as some would make it out to be.

How to take apart a sleep number bed? 13 Easy Steps

Step 1:

First, you need to take apart the sleep number bed frame. There are 4 pieces to the frame. Two legs and two vertical boards.

The vertical boards will have screws that are holding them together, and so first, you need to make a hole in each of these pieces through which you can screw in a drill bit or wrench to get them off of the bed.

Step 2:

Once you have the two vertical boards off, take a look at the attached wiring. If you look closely, you will see some wires are covered by adhesive tape.

You can either cut the tape off or remove it with a knife or something similar. There is usually one long wire with three small wires on either end.

Step 3:

To remove the white pillows, there are only two small tabs on each pillow that need to be pulled out. They will detach from the frame with a little bit of force.

The last part is taking off the white pillows and finding the hardboard where the sleep number mattress is attached.

Step 4:

Once you have removed this, you will see a long piece of metal that has been twisted into an S-shape and connected to metal tabs that are screwed onto the vertical boards.

You can either cut these metal tabs off with a screwdriver or use vice grips to remove them by twisting them off.

How to Move a Sleep Number Bed?

Step 5:

Take a look at the white cover of the sleep number mattress. You will see two small screws that need to be removed to lift the white cover. Just use your screwdriver or something similar and spend a little time unscrewing them.

Step 6:

Once you have removed the two screws, lift the white cover. There will be three small tabs under it that you can use to get the cover out.

Step 7:

Once you have removed the three tabs, you will find your warranty sticker on the back of the sleep number mattress. It’s simple to peel off too.

Step 8: Now, all that is left is to remove your mattress. You will see a thin metal rod that looks like an antenna that sticks up from the back of your mattress and goes into a little hole on one of the arms of the bed frame. You will need to use something similar, like a screwdriver, to take the metal rods off the bed frame.

Step 9:

This can be a little tricky if you don’t have anything to grip on to try and remove it. You can always lift both sides of the mattress and try pulling it out.

It is not bad to put some small towels under the mattress when lifting it, so you don’t damage your mattress or the frame below it.

Step 10:

Once it is completely off, you can look at your bed frame. There will be a little plastic piece on one of the arms that hangs down. Try to take this off, so you have more access to the interior of your bed frame.

Step 11:

Now you are ready to remove the sleep number mattress from the rest of the frame. You will see three small plastic connectors (two on each side) that stick out and onto metal tabs on one of the vertical boards.

Try to loosen these with a screwdriver, or you can use vice grips to remove the metal tabs and release the plastic connectors.

Step 12:

You will have to slide it over and then take off the plastic piece hanging on one of the arms of the bed frame.

Step 13:

Now you are done! You can take a look at your now completely disassembled sleep number bed. Good job!

Once you have finished, try out your sleep number bed to see if it still works.

Is It Okay to Disassemble A Sleep Number Bed?

As you can see, it is safe to disassemble a sleep number bed, and you are free to do so if you don’t want to buy a new one.

However, it is important to note that you will only be able to use your sleep number bed for the warranty period listed on the manual. After this period has elapsed, buying a new mattress may be more cost-effective than fixing one that gets damaged regularly.

Disassemble A Sleep Number Bed
Disassemble A Sleep Number Bed

Most of the time, it is a good idea to take your mattress to a mattress store and have them patch up any damages or holes in your mattress.

This is because sleep number beds are usually made with memory foam mattresses, which are very difficult to repair.

While it is certainly possible to repair a sleep number bed if you have done so before, it may be easier and more cost-effective to buy a new one.

How do you take apart a Sleep Number bed for moving?

Taking apart a sleep number bed for moving is similar to taking apart the mattress for storage and transportation.

You will use the same tools and follow the same steps. However, this is much easier to do since you don’t need to remove the mattress from the frame.

Before getting started, it can be helpful to make sure that you have some help from another person to transport your mattress from your place of residence to a new location.

Unpacking and putting it back together can be very time-consuming, and having help will be very beneficial.

Is it easy to move a Sleep Number bed?

Moving a sleep number bed is easier than moving a traditional mattress. You don’t need to take it apart when moving it unless you want to.

It can be very helpful to have help from another person if moving your mattress from place to place, but this depends on the destination of your new location.

It is always a good idea to take precautions when moving a mattress. By doing so, you will prevent damage from occurring. It is suggested that you take your time and be very careful when transporting your sleep number bed to a new location.

When moving a sleep number bed, try to use packing blankets or something similar and wrap them around the mattress. This will help protect your mattress from damage, and it can be used to transport your mattress more safely.

Can I deflate my Sleep Number bed to move it?

Deflating your sleep number bed may be helpful when transporting it to a new location. However, this is not always an easy process to complete.

It cannot be easy. You will have to remove the slats to get access to the screws that hold the air chambers on the top of your sleep number mattress.

Final Thoughts

Taking apart your sleep number bed is not that difficult, but it requires some tools and some patience. However, the result is worth it to get back a new mattress.

Taking apart a sleep number bed will make moving and storing your mattress easier. If you are looking to upgrade your mattress or want to store it until you move temporarily, this is always a good idea.

A sleep number bed is not very expensive, but it can be beneficial to know how to take one apart to save money. Taking away the air chambers on top of the mattress will allow you to keep your air chamber for another time, and the only cost will be getting a new bottom part for your mattress if needed.

I hope this article was helpful and you had no trouble taking apart your sleep number bed. Please share this article with your friends and family below, and Please comment.

Leave a Comment